Each D/F "MIG" (GMAW) torch head is fully assembled and ready to install. In order to make the installation complete, the code number, wire size, make/model (Lincoln wire feeders, Miller wire feeders, Thermadyne (Tweco, Thermal Arc), ESAB/Linde wire feeders, and power sources), and inlet as needed must be specified when ordering. D/F has a full line of wire feeder adapters that allow its "MIG" torches to be connected to Lincoln Electric NA3, NA4, NA5, NA5R, Power Feed 10, LF72, LF74 Automatic wire feeders, Miller series power pins, ESAB, Euro and Tweco wire feeders, & all other wire feeders and power sources. If special welding tools or accessories other than those listed previously are required, please consult with the factory. Get the Right Wire Feeder Adapter Connection to Fit Your "MIG" Wire Feeder.

Listed below the ordering information for wire feeder adapters are the different wire feeders D/F Machine Specialties Torches can connect to by the use of D/F's feeder adapters. Feeder adapter connections not listed here can often be addressed by the wide variety of available D/F Machine Specialties feeder adapter kits. If you cannot find the feeder connection you need to connect the D/F Machine Specialties torches, please contact our Technical Service Department at the factory by This e-mail address is being protected from spambots. You need JavaScript enabled to view it  or by phone (507) 625-6200 for more information.

Miller® Wire Feeders: 10 Series, 10E, 30 Series, 30A, 30B, 30E, 70 Series, 70A, 80 Series, 80A, MM10A, XRA, Most models including: 60M, Cricket, Cricket XL, D-60, D-62, D-64; Millermatic 120, 130, 135, 150, 175, 185, 210, 250, 250MP, 90, Vintage; R-115, S-21E, S-22A, S-22P-12, S-22P8, S-300 Series (S-325), S-32P, S-32P-12, S-32P-8, S-32S, S-32SL, S-44GL, S-50 Series, S-60 Series, S-70 Series, Sidekick, Sidekick XL, Suitcase Feeders

Lincoln® Wire Feeders: SP250, SP253, LN-23-P, LN-25, LN-7 (2 & 4 Drive), LN-742, LN-742H, LN-9, LN-9 GMA, Synergic 7

OTC® Wire Feeders: Most models, including CM-145, CM-146, CM-147, CM-231, CM-747, DynaAuto

Linde/ESAB® Euro Wire Feeders: All Models, Omni Mig, OMNI-MIG160, OMNI-MIG325, SP250, SP253

Linde®/ESAB® Wire Feeders: ME-2, MigMaster 180, DigiMIG Dual, DigiPlus, DigiPulse, Dip/Stick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4HD, MIGhty V, Universal V, MIG 2E, MIG 4HD, MigMaster 250, MigMaster 300L

Hobart® Wire Feeders: Hobart Dual, 17, IronMan 210, IronMan 250

Linde® Wire Feeders: All Models

Mavrix® Wire Feeders: All Models

OXO® Wire Feeders: AVC-8Q, AVC-30Q

Panasonic® Wire Feeders: All Models

TWECO® (Thermadyne®, Thermal Arc®) Wire Feeders: Feeders adapted to TWECO® style 3/4 dia power pin, MultiMaster 260, DuraDrive 4-30, DuraDrive 4-48, CMUS-511, PowerMig 255 and 300, SP85, SP100, SP100T, SP125T, SP130T, SP160, SP170, SP170T, MigPak 10 and 55, WeldPak 100, Wirematic 250 and 255, Model 17, Digital 2000, Digital 2200 series, Migit 17, 2410, Beta-Mig 250, BetaMig 251, Dual-Digital, Handler 120, HMC-140, PortaFeed 1000, Pro Feed 412, Ultra Feed 1000, Beta-Mig 170, Handler 150, HMC-410, PortaFeed 17, Ultra-Feed 1000, Porta-Wire CC/CV, Tweco #4

Fronius® Wire Feeders: * Feeder manufacturer offers different gun receiver bushings that will change the direct plug required; Miller, Tweco, Euro, Etc.